BLACK ROSE "deviated septum" 9'5"
The Deviated Septum is inspired by a 1967 Hansen Competitor, and is a more streamlined version of this iconic ’60s noserider. This model is complemented by a defined kick in the tail, and a generous amount of belly throughout the majority of the bottom of the board. While the outline is relatively parallel it pulls in towards the tail, which helps the board turn surprisingly well. We turned the rail on the nose up a little and added a slight nose concave that subtly transitions into the belly.
Works best in a variety of conditions from ankle high to overhead, great for beach breaks and points alike. The belly creates a smooth ride in clean or bumpy conditions. Combined with the slight nose concave, this board creates a generous amount of lift on the tip and tends to retain more hold in steeper sections than the Darkhorse.
FINS: single fin [not included]
SPECS: 9'5" x 23.5" x 2 -7/8"
GLASSING: Poly, with an old mink coat resin tint, black pin-line.
FOAM: PU foam, color-core t-band wedge stringer.
PRICE: $1,390
Call for more details: 609-264-1999
Works best in a variety of conditions from ankle high to overhead, great for beach breaks and points alike. The belly creates a smooth ride in clean or bumpy conditions. Combined with the slight nose concave, this board creates a generous amount of lift on the tip and tends to retain more hold in steeper sections than the Darkhorse.
FINS: single fin [not included]
SPECS: 9'5" x 23.5" x 2 -7/8"
GLASSING: Poly, with an old mink coat resin tint, black pin-line.
FOAM: PU foam, color-core t-band wedge stringer.
PRICE: $1,390
Call for more details: 609-264-1999
|
|
Black rose "Fine Swine" 9'7"
The Black Rose "Fine Swine" works exceptionally well in long tight sections, especially point breaks. The hips help govern your speed and pull you back into the pocket, while the back half of the board retains enough width to give the rider a stable platform when walking and riding the front half of the board. The narrower nose lends the board to quicker turning capabilities and less hang ups in the pocket.”
FINS: single fin [not included]
SPECS: 9'7" x 23.5" x 2 7/8"
GLASSING: Poly, with an army green resin tint, black pin-line.
FOAM: PU foam, color-core t-band stringer.
PRICE: $1,423
Call for more details: 609-264-1999
FINS: single fin [not included]
SPECS: 9'7" x 23.5" x 2 7/8"
GLASSING: Poly, with an army green resin tint, black pin-line.
FOAM: PU foam, color-core t-band stringer.
PRICE: $1,423
Call for more details: 609-264-1999
DONALD TAKAYAMA "double ender" 9'6"
The Donald Takayama Double Ender is a classic retro pintail noserider. Donald pulled this design from his repertoire in the early 50's and 60's. It is a classic retro design, glassed w/ volan cloth so weight stays true to the era from which it originated. So called the "Double Ender" because both the nose and tail are pulled in for speedy, overhead sections. Although this board can be ridden in any size waves, its full potential shines in waves that are bigger than waist high.
FINS: single fin [not included]
SPECS: 9'6" x 22.75" x 3 -1/16"
GLASSING: Poly, with a teal resin tint, black pin-line.
FOAM: PU foam, color-core t-band stringer.
PRICE: $1,430
Call for more details: 609-264-1999
FINS: single fin [not included]
SPECS: 9'6" x 22.75" x 3 -1/16"
GLASSING: Poly, with a teal resin tint, black pin-line.
FOAM: PU foam, color-core t-band stringer.
PRICE: $1,430
Call for more details: 609-264-1999
RICKY CARROLL "RETRO 3" 9'4"
The "Ricky Retro 3" has 50/50 rails and a dished concave on the nose for extended noseriding, with a pin-tail for quick pivot turning. Everything about this outline tells me it will work in everything from two foot to double overhead surf.
FINS: single fin [not included]
SPECS: 9'4" x 23 x 2.75"
GLASSING: Poly, with a blue resin tint with black smoke, and black pinline.
FOAM: PU
PRICE: $1,320
Call for more details: 609-264-1999
FINS: single fin [not included]
SPECS: 9'4" x 23 x 2.75"
GLASSING: Poly, with a blue resin tint with black smoke, and black pinline.
FOAM: PU
PRICE: $1,320
Call for more details: 609-264-1999
RICKY CARROLL "JB Model" 9'2"
The Ricky Carroll "JB Model" is a performance longboard based off a DT3 outline and Ricky Carroll‘s performance board dimensions and performance package. The board works great in medium to bigger surf, and turns like you’re riding a short board and you can still old school it on the nose.
FINS: 2 + 1 set up [side bites included]
SPECS: 9'2" x 22.5" x 2.75"
GLASSING: Epoxy with airbrushed rails.
FOAM: EPS
PRICE: $1,268
Call for more details: 609-264-1999
FINS: 2 + 1 set up [side bites included]
SPECS: 9'2" x 22.5" x 2.75"
GLASSING: Epoxy with airbrushed rails.
FOAM: EPS
PRICE: $1,268
Call for more details: 609-264-1999
CANNIBAL / COREVAC "CLASSIC" 9'10"
CANNIBAL COREVAC "CLASSIC" LONGBOARD 9'10"
FINS: SINGLE [not included]
SPECS: 9'10" X 23.25" X 3.25"
GLASSING: Epoxy, Vacuum bagged with multiple layers of high end fiberglass for extra strength to weight ratio!
FOAM: EPS with a ply stringer
PRICE: $1350
Call for more details: 609-264-1999
FINS: SINGLE [not included]
SPECS: 9'10" X 23.25" X 3.25"
GLASSING: Epoxy, Vacuum bagged with multiple layers of high end fiberglass for extra strength to weight ratio!
FOAM: EPS with a ply stringer
PRICE: $1350
Call for more details: 609-264-1999
DONALD TAKAYAMA "IN THE PINK" 9'2"
The Donald Takayama “In The Pink” longboard surfboard is the ultimate high performance noserider for the beginner to advanced level surfer! This is definitely the most loved and sought after model in Donald’s range, and currently the number one selling longboard in the world!. This board handles a wide range of waves from one foot, to overhead. The wider nose allows for easy wave entry and longer noserides, while the tail of the board handles high performance turns and cutbacks.
FINS: 2 + 1 set up [side bites included]
SPECS: 9'2" x 22 3/4 x 3"
GLASSING: Poly, Resin tint nose and band
FOAM: PU
PRICE: $1,415
Call for more details: 609-264-1999
FINS: 2 + 1 set up [side bites included]
SPECS: 9'2" x 22 3/4 x 3"
GLASSING: Poly, Resin tint nose and band
FOAM: PU
PRICE: $1,415
Call for more details: 609-264-1999
DONALD TAKAYAMA "DT2" 9'0"
The DT2 is a Modern Longboard Noserider
Donald’s ‘all-rounder’. This board was designed with more focus on noseriding than the DT-1. With the ability to do it all, turns, trim, noseride, this board could easily be a one board quiver. Working in waves from ankle high to well overhead, the DT-2 can be ridden and enjoyed by everyone.
FINS: 2 + 1 set up [side bites included]
SPECS: 9'0" x 22 3/8 x 2 7/8"
GLASSING: Poly, Resin tint top and bottom
FOAM: PU
PRICE: $1,395
Call for more details: 609-264-1999
Donald’s ‘all-rounder’. This board was designed with more focus on noseriding than the DT-1. With the ability to do it all, turns, trim, noseride, this board could easily be a one board quiver. Working in waves from ankle high to well overhead, the DT-2 can be ridden and enjoyed by everyone.
FINS: 2 + 1 set up [side bites included]
SPECS: 9'0" x 22 3/8 x 2 7/8"
GLASSING: Poly, Resin tint top and bottom
FOAM: PU
PRICE: $1,395
Call for more details: 609-264-1999
DONALD TAKAYAMA "DT2" 9'2" ***SOLD***
The DT2 is a Modern Longboard Noserider. Donald’s ‘all-rounder’. This board was designed with more focus on noseriding than the DT-1. With the ability to do it all, turns, trim, noseride, this board could easily be a one board quiver. Working in waves from ankle high to well overhead, the DT-2 can be ridden and enjoyed by everyone.
FINS: 2 + 1 set up [side bites included]
SPECS: 9'2" x 22 5/8 x 2 15/16"
GLASSING: Poly, Resin tint top and bottom
FOAM: PU
PRICE: $1,395
Call for more details: 609-264-1999
FINS: 2 + 1 set up [side bites included]
SPECS: 9'2" x 22 5/8 x 2 15/16"
GLASSING: Poly, Resin tint top and bottom
FOAM: PU
PRICE: $1,395
Call for more details: 609-264-1999
SAVAGE SURFBOARDS "SALTED SOW" 9'8"
The "Salted Sow" is shaped by Kenny Briel on a custom Arctic Foam. .It has classic noserider rocker for clean east coast surfing, It has lots of glide for endless summer-time fun.
FINS: Center box. [Fin not included]
SPECS: 9'8" x 23.5" x 3.25"
GLASSING: Poly, Red resin tint panels, and black pin lines.
FOAM: Arctic foam. [bio foam]
PRICE: $1,445
Call for more details: 609-264-1999
FINS: Center box. [Fin not included]
SPECS: 9'8" x 23.5" x 3.25"
GLASSING: Poly, Red resin tint panels, and black pin lines.
FOAM: Arctic foam. [bio foam]
PRICE: $1,445
Call for more details: 609-264-1999
DONALD TAKAYAMA "IN THE PINK" 9'6"
The Donald Takayama “In The Pink” longboard surfboard is the ultimate high performance noserider for the beginner to advanced level surfer! This is definitely the most loved and sought after model in Donald’s range, and currently the number one selling longboard in the world!. This board handles a wide range of waves from one foot, to overhead. The wider nose allows for easy wave entry and longer noserides, while the tail of the board handles high performance turns and cutbacks.
FINS: 2 + 1 set up [side bites included]
SPECS: 9'4" x 22 7/8 x 3 1/16"
GLASSING: Poly, Resin tint nose and band
FOAM: PU
PRICE: $1,415
Call for more details: 609-264-1999
FINS: 2 + 1 set up [side bites included]
SPECS: 9'4" x 22 7/8 x 3 1/16"
GLASSING: Poly, Resin tint nose and band
FOAM: PU
PRICE: $1,415
Call for more details: 609-264-1999
DONALD TAKAYAMA "IN THE PINK" 9'6" ****SOLD****
The Donald Takayama “In The Pink” longboard surfboard is the ultimate high performance noserider for the beginner to advanced level surfer! This is definitely the most loved and sought after model in Donald’s range, and currently the number one selling longboard in the world!. This board handles a wide range of waves from one foot, to overhead. The wider nose allows for easy wave entry and longer noserides, while the tail of the board handles high performance turns and cutbacks.
FINS: 2 + 1 set up [side bites included]
SPECS: 9'6" x 23" x 3.25"
GLASSING: Poly, Resin tint nose and band
FOAM: PU
PRICE: $1,415
Call for more details: 609-264-1999
FINS: 2 + 1 set up [side bites included]
SPECS: 9'6" x 23" x 3.25"
GLASSING: Poly, Resin tint nose and band
FOAM: PU
PRICE: $1,415
Call for more details: 609-264-1999
CANNIBAL / COREVAC "GLASS PERFORMER" 9'2"
CANNIBAL COREVAC "BONZER "9'2"
FINS: 2+1 [fins not included]
SPECS: 9'2" X 23."1/8 X 3.1/8"
GLASSING: Epoxy, Vacuum bagged for extra strength to weight ratio!
FOAM: EPS
PRICE: $1,195
Call for more details: 609-264-1999
FINS: 2+1 [fins not included]
SPECS: 9'2" X 23."1/8 X 3.1/8"
GLASSING: Epoxy, Vacuum bagged for extra strength to weight ratio!
FOAM: EPS
PRICE: $1,195
Call for more details: 609-264-1999
CANNIBAL / COREVAC "GLASS PERFORMER" 9'0"
CANNIBAL COREVAC "BONZER "9'0"
FINS: 2+1 [fins not included]
SPECS: 9'0" X 23." X 3.1/16"
GLASSING: Epoxy, Vacuum bagged for extra strength to weight ratio!
FOAM: EPS
PRICE: $1,195
Call for more details: 609-264-1999
FINS: 2+1 [fins not included]
SPECS: 9'0" X 23." X 3.1/16"
GLASSING: Epoxy, Vacuum bagged for extra strength to weight ratio!
FOAM: EPS
PRICE: $1,195
Call for more details: 609-264-1999
CANNIBAL / COREVAC "BONZER" 8'6"
CANNIBAL COREVAC "BONZER" 8'6"
FINS: 2 + 1 fin set-up [not included]
SPECS: 8'6" X 23" X 3"
GLASSING: Epoxy, Vacuum bagged for extra strength to weight ratio! Speed finish.
FOAM: EPS
PRICE: $1,120
Call for more details: 609-264-1999
FINS: 2 + 1 fin set-up [not included]
SPECS: 8'6" X 23" X 3"
GLASSING: Epoxy, Vacuum bagged for extra strength to weight ratio! Speed finish.
FOAM: EPS
PRICE: $1,120
Call for more details: 609-264-1999
CANNIBAL / COREVAC "BONZER" 7'10"
CANNIBAL COREVAC "BONZER" 7'10"
FINS: 2 + 1 fin set-up [not included]
SPECS: 7'10" X 23" X 3"
GLASSING: Epoxy, Vacuum bagged for extra strength to weight ratio! Speed finish.
FOAM: EPS
PRICE: $920
Call for more details: 609-264-1999
FINS: 2 + 1 fin set-up [not included]
SPECS: 7'10" X 23" X 3"
GLASSING: Epoxy, Vacuum bagged for extra strength to weight ratio! Speed finish.
FOAM: EPS
PRICE: $920
Call for more details: 609-264-1999
CANNIBAL / COREVAC "BONZER" 7'0" ***SOLD***
CANNIBAL / COREVAC "BONZER" 7'0"
FINS: Thruster fin set-up [not included]
SPECS: 7'0" X 22" X 2.75"
GLASSING: Epoxy, Vacuum bagged for extra strength to weight ratio!
FOAM: EPS
PRICE: $849
Call for more details: 609-264-1999 or text Mike at 609-457-3812
FINS: Thruster fin set-up [not included]
SPECS: 7'0" X 22" X 2.75"
GLASSING: Epoxy, Vacuum bagged for extra strength to weight ratio!
FOAM: EPS
PRICE: $849
Call for more details: 609-264-1999 or text Mike at 609-457-3812
CANNIBAL / COREVAC "BONZER" 6'6"
CANNIBAL COREVAC "BONZER" 6'6"
FINS: Single fin [not included]
SPECS: 6'6" X 21.5" X 2.75"
GLASSING: Epoxy, Vacuum bagged for extra strength to weight ratio!
FOAM: EPS
PRICE: $795
Call for more details: 609-264-1999 or text Mike at 609-457-3812
FINS: Single fin [not included]
SPECS: 6'6" X 21.5" X 2.75"
GLASSING: Epoxy, Vacuum bagged for extra strength to weight ratio!
FOAM: EPS
PRICE: $795
Call for more details: 609-264-1999 or text Mike at 609-457-3812
Cannibal CoreVac "Bonzer" 6'2"
CANNIBAL COREVAC BONZER FUNBOAD SURFBOARD
FINS : fcs2 boxes / bonzer setup, tri fin [not Included]
SPECS: 6'2" x 21.25" x 2.75"
GLASSING: Epoxy, Grey, Purple, White Resin tint. Vacuum bagged for extra strength to weight ratio!
FOAM: EPS
PRICE: $775
Call for more details: 609-264-1999
FINS : fcs2 boxes / bonzer setup, tri fin [not Included]
SPECS: 6'2" x 21.25" x 2.75"
GLASSING: Epoxy, Grey, Purple, White Resin tint. Vacuum bagged for extra strength to weight ratio!
FOAM: EPS
PRICE: $775
Call for more details: 609-264-1999
